Configuration

            You can configure client properties from this screen

Configuration

1.  Configuration screen

        Server address             

        You must write the IP address of  the computer where "Remote

       dialer server"  is installed.  If your the computer  has several IP,

       you must choose  the address that has the same subnet

       as your client computer.

        Server port

        Write the port number of "Remote dialer server" (default value = 255).

        You can see the "remote dialer server" port from the "Configuration screen"

        of "remote dialer server" . This value must be identical.

        Default entry

        You can choose  an entry that will be dialed when you click dial button

        without choosing  "dial entry" list.

       Autoconnect on startup 

       Check this box if you want this client to automatically  connect to the server

       when start.

      Minimize client on startup

      Check this box if you want the client start in the tray icon

      Start with windows

      Check this box if you want the client to start when windows start

2.  Button

     Save button

    Use this button to save configuration.

     Don't forget to disconnect and reconnect again to activate configuration